363-206-305
Page 6 of 8 Issue 3, June 2000
DDM-2000 F
IBER
R
EACH
N
ARROWBAND
S
HELF
To reduce the possibility of ESD damage, shelves are equipped with grounding jacks to
enable personnel to ground themselves using wrist straps (see Figure 1) while handling
circuit packs or working on a shelf(s). The jacks for connection of wrist straps are located at
the lower right-hand corner of each shelf and are labeled. When grounding jacks are not
provided, an alligator clip adapter enables connection to bay frame ground.
Figure 1. Static Control Wrist Strap
Ground
To
Connection
To Next Page
Loading...