Lucent Technologies FiberReach DDM-2000 - Page 1786

IXL-001
: Operation and Maintenance 363-206-305
Page 4 of 4 Issue 3, June 2000
DDM-2000 F
IBER
R
EACH
N
ARROWBAND
S
HELF
Table A. Numerical List of TOP Procedures (Contd) (Note)
Detailed Level Procedures (DLP) Tab
DLP-500 Perform Visual Inspection of the Electronics Compartment
DLP-501 Perform Visual Inspection of the Drop Terminal Blocks
DLP-502 Install -48 V DC PCU (AUA432)
DLP-503 Install RGU (AUA413)
DLP-504 Install Channel Units
DLP-505 Install DSXBIU (FHB2)
DLP-506 Install CDTU (AUA421)
DLP-507 Test ONU Drops 1 - 24 (Shelf 1) 1 - 24 (Shelf 2)
DLP-508 Set Options on
SPQ 810 DT Server For Use With FR NBS
DLP-509 Unused
DLP-510 Unused
DLP-511 Perform DDM-2000 NBS MLT Channel Test
DLP-512 End-to-End Testing
DLP-513 Determine
SLC -2000 DT Circuit Arrangement
DLP-514 Rear Access to the Wall DT Cabinet
DLP-515 Perform Visual Inspection of the STAC Cabinet
Note:
Table 1 is provided as a reference only, and should not be used alone in
finding instructions for performing tasks.