363-206-305 Acceptance:
Issue 3, June 2000 Page 1 of 2
DDM-2000 F
IBER
R
EACH
N
ARROWBAND
S
HELF
NTP-002
Accept DDM-2000 FiberReach
Narrowband Shelf (NBS)
DO ITEMS BELOW IN ORDER LISTED . . . . FOR DETAILS, GO TO
General
Acceptance tests of the NBS are performed to ensure that proper installation
procedures have been performed.
For
SLC
®
-2000
1
, Release 4.4 or later, the NBS is powered by −48 V DC.
The acceptance tests generally assume the following:
• Accurate and concise system designations and office records are available
• There is an operational
SLC
-2000 DT server
• Any trouble found and not corrected during testing is referred to the responsible
installation group
• The test equipment to be used is available, properly tested, and properly
calibrated.
1. Obtain the following equipment:
• 216-C tool (COMCODE 102450574) if required
• Digital multimeter (DMM) with an accuracy of 1.0% and an
AC/DC input impedance of ≥ 1 megohm.
2. Verify the NBS enclosure is securely mounted.
DLP-5003. Perform visual inspection of the electronics compartment.
1. Registered trademark of Lucent Technologies Inc.
To Next Page
Loading...