DLP-505
: Detailed Level Procedures 363-206-305
Page 4 of 6 Issue 3, June 2000
DDM-2000 F
IBER
R
EACH
N
ARROWBAND
S
HELF
18. Do all indicators light?
19. If you are not continuing with the turn up procedure, disconnect your wrist
strap, secure the electronics compartment door, and replace the NBS
enclosure.
20.
STOP. YOU HAVE COMPLETED THIS PROCEDURE.
If
YES
, then continue with
Step
19
.
If
NO
, replace circuit pack(s) that contain indicators that
do not light and repeat LED test.
If
NO RESPONSE
, replace
DSXBIU
and repeat from
Step
9
of this procedure.
If
NO
or
NO RESPONSE
after replacement, contact the
responsible installation group to clear wiring trouble.
To Next Page
Loading...