Lucent Technologies FiberReach DDM-2000 User Manual

Issue 3 June 2000
6-1
6
Operations Interfaces
6
Overview
6
This chapter presents the operations interfaces that enable local and remote
access to the DDM-2000 FiberReach Multiplexer Wideband shelf for its
management.
NOTE:
For the DDM-2000 FiberReach Multiplexer Narrowband shelf, all operations
are through the
SLC
-2000.
Operations interfaces include:
■
EIA-232-D craft interface terminal (CIT) interface
■
User panel controls and indicators
■
Equipment status indicators
■
Office alarms
■
TL1/X.25 interface (via the host system) to an alarm surveillance OS such
as Telcordia Technologies’ Network Monitoring and Analysis (NMA) and
Operations Systems/Intelligent Network Elements (OPS/INE), and Lucent
Technologies ITM SNC (Integrated Transport Management SubNetwork
Controller)
■
User definable miscellaneous discrete environmental alarms and controls.

Lucent Technologies FiberReach DDM-2000 Specifications

General

Brand	Lucent Technologies
Model	FiberReach DDM-2000
Category	Multiplexer
Language	English