363-206-305
Administration and Provisioning
Issue 3 June 2000
8-45
Example Cross-Connections
8
For example, to establish the end-to-end DS1 circuit that is passed through the
OC-3 subsystem Host without using bandwidth on the OC-3 ring, the following
cross-connects need to be established:
■
At the node Host, enter the following cross-connection:
ent-crs-vt1:b-1-2-4,b-1-2-4:cct=twoway;
The VT signal passes through from a FiberReach node to another
FiberReach node on the OC-1 ring without using bandwidth on the OC-1
Host node.
■
At the FiberReach nodes, enter the following cross-connection:
ent-crs-vt1:m-1-2-4,c-1-1:cct=twoway;
NOTE:
This is a drop from the OC-1 ring to a DS1 interface.
To Next Page
Loading...