Lucent Technologies FiberReach DDM-2000 - Page 591

DLT-CRS-STS1 2of1Page DLT-CRS-STS1
NAME
STS-1Cross-ConnectionDeletedlt-crs-sts1:
FORMATINPUT
dlt-crs-sts1: Address1 , Address2 [: cct= CrsType];
DESCRIPTION
!
CAUTION:
service.affectmaycommandthisofExecution
availableiscommandThiscross-connections.STS-1deletescommandThis
isshelfFiberReachthewhenlater,and3.1ReleaseFiberReachwithbeginning
slots.unitMainbothinOLIUsOC-328-typewithequipped
are:parametersinputThe
Address1 and Address2
STS-1oneorchannels,STS-1twotheofaddressestheareThese
thewherelater)and3.1Release(inportDS3oneandchannel
ringIndeleted.betoiscross-connectionSTS-1existing
theusingbydeletedareconnectionspass-throughapplications,
foraddresssame Address1 and Address2 .
(inslotsunitMaininOLIUs28-typewithequippedisshelftheIf
are:addressesvalidreleases),laterand3.1FiberReach m-{1-3}
(inslotsunitMaininOLIUs29-typewithequippedisshelftheIf
are:addressesvalidthelater),and4.0ReleaseFiberReach
m-{1-12}
slotsunitFunctiontheinpackscircuitDS3ofequipagetheFor
addressunitFunctionvalidthelater),and3.1Release(FiberReach
is: f
cct are:valuesvalidThetype.cross-connectionthespecifiesCrsType
twoway toapplycross-connections(default)Two-way
pass-throughandadd/drop,hubbing,terminating,
value.defaulttheisThisconfigurations.
NOTE:
The cct cross-theifparameteroptionalanisparameter
isdeletedbetotypeconnection twoway The. cct
values.CrsTypeotherforrequiredisparameter
FiberReachDDM-2000 2000June3Issue 11-31