Lucent Technologies FiberReach DDM-2000 - Page 596

DLT-CRS-VT1 4of1Page DLT-CRS-VT1
NAME
VT1.5Cross-ConnectionDeletedlt-crs-vt1:
FORMATINPUT
dlt-crs-vt1: Address1 , Address2 [:cct=CrsType];
DESCRIPTION
!
CAUTION:
service.affectmaycommandthisofExecution
DDM-2000awithincross-connectionssignalVT1.5deletescommandThis
system.FiberReach
are:parametersinputThe
Address1 and Address2
oneorchannels,VT1.5twotheofaddressestheareThese
cross-existingwhereport,T1orDS1oneandchannelVT1.5
pass-applications,ringIndeleted.betoareconnections
foraddresssametheusingbydeletedareconnectionsthrough
Address1 and Address2 .
slots,unitMaininOLIUs26-typewithequippedisshelftheIf
are:addressesvalid
m-1-allm-1-{1-7}-{1-4,all},
(inslotsunitMaininOLIUs28-typewithequippedisshelftheIf
are:addressesVT1.5validlater)and3.1FiberReach
m-{1-3,all}-{1-7}-{1-4,all}
slotsunitMaininOLIUs29-typewithequippedisshelftheIf
unitMainOC-12validlater),and4.0Release(FiberReach
are:Addresses
m-{1-12}-{1-7,all}-{1-4,all}
configurations:low-speedprotected1X1inaddressesportValid
{a,b,c,d}-1-{1,4,all}
configurations:low-speedprotected1x7inaddressesportValid
{a,b,c}-{1,2}-{1,4,all},
d-1-{1-4,all}
Whenports.T1twosupportspackcircuit(BBF6)T1EXTThe
are2and1numbersportonlyBBF6,aonportsaddressing
Specifyingvalid. all only.2and1portsselects
11-36 2000June3Issue FiberReachDDM-2000