Lucent Technologies FiberReach DDM-2000 - Page 603

ENT-CRS-STS1 3of1Page ENT-CRS-STS1
NAME
STS-1Cross-ConnectionEnterent-crs-sts1:
FORMATINPUT
ent-crs-sts1: Address1 , Address2 [: cct= CrsType];
DESCRIPTION
andMainbetweencross-connectionsSTS-1bidirectionalsetscommandThis
whenreleases,laterand3.1FiberReachwithavailableisandslotsunitfunction
slots.MaininpackscircuitOLIU28-typethewithequipped
becanslotsunitfunctionthe3.1,ReleaseFiberReachwithstartingAlso
cross-(add/drop)two-waysupportingpacks,circuitDS3withequipped
types.connection
whenalsousedbecancommandthis4.0,ReleaseFiberReachwithStarting
circuitDS3andslotsMaininpackscircuitOLIU29-typeor26withequipped
slots.FNtheinpacks
are:parametersinputThe
Address1 and Address2
STS-1oneorchannelsSTS-1twotheofaddressestheareThese
STS-1Forcross-connected.betoarethatportDS3oneandchannel
traffic,pass-throughring Address1 and Address2 thebemust
pages.followingtheonlistedareaddressesValidslot.timesame
NOTE:
bidirectional.arecross-connectionsAll
cct are:valuesvalidThetype.cross-connectionthespecifiesCrsType
twoway terminating,toapplycross-connectionsTwoway
defaulttheisTwowaypass-through,add/drop,hubbing,
value.
thecross-connection,pass-throughaindicateaddressestheIf
tosetautomaticallyisbutforpromptednotisCrsType twoway The.
ofCrsTypeathatindicatesmessageconfirmation twoway beenhas
thanotherCrsTypeaIfuser.theforselected twoway onenteredis
pass-throughaindicateaddressesthewhenlinecommandthe
rejected.isrequestthecross-connection,
manualalwaysismodecross-connectthereleases,FiberReachDDM-2000In
(crs= manual itemsWherebelow.listedarecross-connectionsmanualValid).
formtousedbemayitemstheseofone)only(andoneany},{bracesinappear
address.the
FiberReachDDM-2000 2000June3Issue 11-43