Lucent Technologies FiberReach DDM-2000 User Manual

ENT-CRS-VT1 8of3Page ENT-CRS-VT1
are:parametersinputThe
Address1 and Address2
oneorchannels,VT1.5twotheofaddressestheareThese
cross-betoarethatportT1orDS1oneandchannelVT1.5
traffic,pass-throughringVT1.5Forconnected. Address1 and
Address2 theonlistedareaddressesValidsame.thebemust
pages.following
NOTE:
bidirectional.arecross-connectionsAll
cct valuesvalidThetype.cross-connectionthespecifiesCrsType
are:
twoway pass-throughandadd/droptoappliesTwo-way
configurations. Twoway forvaluedefaulttheis cct .
locked nonpath-switchedsupportcross-connectionsLocked
applications.dropDS1
thecross-connection,pass-throughaindicateaddressestheIf
tosetautomaticallyisbutforpromptednotisCrsType twoway.
ofCrsTypeathatindicatesmessageconfirmationThe twoway
thanotherCrsTypeaIfuser.theforselectedbeenhas
twoway addressesthewhenlinecommandtheonenteredis
isrequestthecross-connection,pass-throughaindicate
valuetheIfrejected. all theaddress,theinusedis cct
theofrangethewithincross-connectioneverytoapplies
addresses.
ring cross-connections.lockedforidentificationringtheisRingId
are:valuesvalidThe
m1 Ring m1 Main-1theonreceivedisthatringtheis
OLIU.Main-2theontransmittedisandOLIU
m2 Ring m2 Main-2theonreceivedisthatringtheis
OLIU.Main-1theontransmittedisandOLIU
isCrsTypetheIf locked indisplayedisandforpromptedalwaysisRingIdthe,
notisCrsTypetheIfmessages.confirmation locked notisRingIdthe,
isCrsTypetheIfmessages.confirmationindisplayednotisitandforprompted
not locked isRingIdforenteredvaluetheanyway,enteredisRingIdand
ignored.
11-52 2000June3Issue FiberReachDDM-2000

Lucent Technologies FiberReach DDM-2000 Specifications

General

Brand	Lucent Technologies
Model	FiberReach DDM-2000
Category	Multiplexer
Language	English