Lucent Technologies FiberReach DDM-2000 User Manual

OPR-LPBK-T1 5of2Page OPR-LPBK-T1
are:parametersinputThe
Address back.loopedbetoport(s)T1orDS1ofAddress
LSprotected1x1ainaddressesvalidloopback,terminalaFor
are:configuration
{a,b,c,d}-1-{1-4,all}{a,b,c,d}-all,all,
LSprotected1x7ainaddressesvalidloopback,terminalaFor
are:configuration
d-1-{1-4,all}{a,b,c}-{1,2}-{1-4,all},all,
LSprotected1x1ainaddressesvalidloopback,facilityaFor
are:configuration
{a,b,c,d}-1-{all},{a,b,c,d}-all,all,
protected1x1validtheBBF3Bthewithlaterand3.0ReleaseFor
are:addresses
{a,b,c,d}-1-{1-4,all}{a,b,c,d}-all,all,
LSprotected1x7ainaddressesvalidloopback,facilityaFor
are:configuration
d-1-all{a,b,c}-{1,2}-{all},all, .
protected1x7validtheBBF3Bthewithlaterand3.0ReleaseFor
are:addresses
d-1-{1-4,all}{a,b,c}-{1,2}-{1-4,all},all,
Whenports.T1twosupportpackscircuitBBF8andBBF6The
are2and1numberportsonlypacks,theseonportsaddressing
Specifyingvalid. all only.2and1portsselects
lpbktype facility.orterminalisloopbackthewhetherspecifiesLoopbacktype
are:parameterthisforvaluesvalidThe
terminal high-speedthetowardsdirectedloopbackTerminal
value.defaultaisThisfacility.
facility T1orDSXthetowardsdirectedloopbackFacility
circuitBBF3andBBF1B,BBF1,theForinterface.
fourallcausesloopbacktheofoperationpacks,
thetowardsbackloopedbetosignalsDS1incoming
interface.T1orDSX
facilityDS1individualanlater,and3.0ReleaseIn
theoninterfaceDS1eachonsupportedisloopback
pack.circuitBBF3B
FiberReachDDM-2000 2000June3Issue 11-91

Lucent Technologies FiberReach DDM-2000 Specifications

General

Brand	Lucent Technologies
Model	FiberReach DDM-2000
Category	Multiplexer
Language	English