Lucent Technologies FiberReach DDM-2000 - Page 710

RTRV-NE 5of5Page RTRV-NE
Apply
Action FiberReachwithstartingreportedisparameterThis
isgenericsoftwaredormantaIf4.0.Release
theandelement,networkthebystoredcurrently
apply programforschedulediscommand
withinstallation Action=install on
Date=date and Time=time reportedisdatethe,
HH:MM:SSastimeandYYMMDD,digit6aas
"blankayet,scheduledisinstallationprogramnoIf
reportwilltimeandDateAction.underreportedis"
Time=)Date=(example:alsovalues""blank
bystoredcurrentlyisgenericsoftwaredormantaIf
theandelement,networkthe apply iscommand
withscheduled Action=cancel is""blanka,
blankreportwilltimeandDateAction.forreported
Time=)Date=(example:alsovalues""
Schedule
Date FiberReachwithstartingreportedisparameterThis
theIf4.0.Release apply schedulediscommand
withinstallationprogramfor Action=install on
Date=date 6aasreportedisparameterThis.
YYMMDD.digit
Time FiberReachwithstartingreportedisparameterThis
theif4.0.Release apply schedulediscommand
withinstallationprogramfor Action=install.
HH:MM:SSasreportedisparameterThis
COMMANDSRELATED
rtrv-map-network
set-ne
11-150 2000June3Issue FiberReachDDM-2000