Lucent Technologies FiberReach DDM-2000 - Page 747

RTRV-PMTHRES-SECT 1of1Page RTRV-PMTHRES-SECT
NAME
SectionThresholdMonitoringPerformanceRetrievertrv-pmthres-sect:
FORMATINPUT
rtrv-pmthres-sect;
DESCRIPTION
parameterperformancesectioncurrentsystem’sthedisplayscommandThis
thebysetasthresholds, set-pmthres-sect command.
follows:asappearsreportoutputThe
tropeRsdlohserhTgnirotinoMecnamrofrePnoitceS*/
=================================================== ============
sdlohserhTretemaraP
yaDretrauQ
ruoH
=================================================== ============
)SFES(sdnoceSemarFderorrEylereveS
nn
are:parametersoutputThe
SecondsFrameErroredSeverely
forvaluesthresholdthedisplaysparameterThis
zeroofthresholdparameterAcount.SEFSthe
disabled.isthresholdingthethatindicates
COMMANDSRELATED
init-pm
rtrv-pm-sect
rtrv-pm-tca
set-pmthres-sect
FiberReachDDM-2000 2000June3Issue 11-187