Lucent Technologies FiberReach DDM-2000 - Page 754

RTRV-PMTHRES-T3 4of1Page RTRV-PMTHRES-T3
NAME
T3ThresholdMonitoringPerformanceRetrievertrv-pmthres-t3:
FORMATINPUT
rtrv-pmthres-t3;
DESCRIPTION
parameterperformanceDS3currentsystem’sthedisplayscommandThis
thebysetasthresholds, set-pmthres-t3 command.
isshelftheifallowediscommandthis3.1,ReleaseFiberReachwithStarting
unitFunctiontheinpackscircuitDS3andMaininOLIUs28-typewithequipped
slots.
equippedisshelftheifalsoallowediscommandthis4.0,ReleaseFiberReachIn
slots.unitFunctiontheinpackscircuitDS3andMaininOLIUs26/29-typewith
NOTE:
theshowwillcommandthispack,circuitBBG19orBBG4BtheusingWhen
monitoringperformancepathDS3withassociatedTCAsofnumbertotal
associatedTCAsTheDSX-3.theandfiberthefromincomingparameters
theforalsoreportedareparametersmonitoringperformancelineDS3with
theforreportedareEndFarorEndNearforparityC-bitFinally,BBG4B.
well.asBBG4B
totaltheshowwillcommandthispack,circuitBBG4theusingWhen
monitoringperformancepathDS3withassociatedTCAsofnumber
only.fiberthefromincomingparameters
page.followingtheonappearsreportoutputThe
NOTE:
pathotherallandparityC-bitDS3toadditioninparameters,lineDS3All
applicableonlyareDSX-3,thefromsignalincomingtheforparameters
unitfunctionain(in-service)activeispackBBG19BBG4/BBG4B,awhen
slot.
11-194 2000June3Issue FiberReachDDM-2000