Lucent Technologies FiberReach DDM-2000 - Page 762

RTRV-SECU 4of3Page RTRV-SECU
porttype Accessthewhenreportedisvalueparameter
isLink dcc (blank).""abydesignatedbewillThis.
baudrate FiberReachwithstartingavailableisparameterThis
TL1whichinbaudratethespecifiesIt4.0.Release
thisforvaluesThereceived/transmitted.aremessages
are:parameter 1200, 2400, 4800, 9600 and(Default),
19200 isTypePortifonlyreported,isparameterThis.
tl1 reported.is(blank)""aotherwise;
echo FiberReachwithstartingavailableisparameterThis
enteredcharacterthewhetherspecifiesIt4.0.Release
are:valuesreportedTheback.echoedbetoneeds
enabled or(default) disabled isparameterThis.
isTypePortifonlyreported tl1 is(blank)""aotherwise;
reported.
UserActive FiberReachwithstartingavailableisparameterThis
idloginuser’stheonreportsparameterThis3.0.Release
communicationtheviaNEtheintologgedcurrentlyisthat
isusernoIfcolumn.LinkAccessthebyidentifiedport
isparameterthisreport,theoftimetheatinloggedcurrently
("-").dashaasreported
Security inordisabled,enabled,issecuritywhethershowsSecurity
valuesvalidTheport.DCCorCITlistedtheonstatelockout
are enabled, disabled or, lockout issecurityWhen.
topasswordandloginvalidaentermustuseraenabled,
inissecurityWhensession.abegin lockout aonlystate,
privileged systemtheaccesstopermittedisuser
ports.CIT/DCCoutlockedthethrough
Timeout beforeminutes,induration,timetheshowsparameterThis
DCCorCITspecifiedaonterminatedissessioninactivean
timeout.noistherethen(0),zeroistimeoutIfinterface.
11-202 2000June3Issue FiberReachDDM-2000