Lucent Technologies FiberReach DDM-2000 User Manual

RTRV-STATE-EQPT 5of4Page RTRV-STATE-EQPT
forced untildonebewillswitchesmanualorautomaticNo
reset.isswitchforcedthe
failureAPS-pack
atodueoccurredhasswitchingprotectionAutomatic
failure.packcircuit
lockAPS-automatic
pack,protectiontheontoheldandforcedisTraffic
midnight.untilpackservicethetoreverttounable
fromswitchesautomaticfourfollowingoccursThis
interval.10-minuteaduringprotectiontoservice
manual protection.toswitchedmanuallybeenhasTraffic
active.arerequestsswitchautomaticormanualNo—
toonlyappliesreportthisinpriorityswitchtheapplications,ringFor
orslots,low-speedtoOLIUsmaintheofswitchingequipmentthe
circuitDS3withequipped(whenslotsunitFunctiontoOLIUsmain
theSeeslots).unitFunctioninpacks rtrv-state-path
information.switchingprotectionpathforcommand
onewithslots,protectionforblankalwaysispriorityswitchThe
ahavemayslotprotectedtheslots,protected1xnForexception.
ofpriorityswitch protectionoflockout .
theinreportedisreferencetimingtheofstateThe rtrv-sync command.
COMMANDSRELATED
rtrv-alm
rtrv-state-path
rtrv-sync
set-state-t1
set-state-t3
switch-fn
switch-ls
switch-sync
upd
FiberReachDDM-2000 2000June3Issue 11-207

Lucent Technologies FiberReach DDM-2000 Specifications

General

Brand	Lucent Technologies
Model	FiberReach DDM-2000
Category	Multiplexer
Language	English