363-206-305
System Introduction
Issue 3 June 2000
1-5
■
SLC
LineReach
Access System
—The
SLC LineReach
Access System is a small digital loop carrier
(DLC) remote terminal (RT) that provides up to 48 lines of POTS-
type services, special services, or other DS0 services. Feature
package 1.1 (FP1.1) supports up to two DS1-type interfaces and
can be deployed in either a universal or integrated DLC
configuration. Some of the basic features that make the
SLC
LineReach
system an attractive, cost-effective DLC system include:
■
Small Size.
The small system size means that you can easily
mount it to meet your customer’s specifications. The system
is approximately the same size as the narrowband shelf.
■
TR-08, INA, and TR-303 Interfaces
.
FP1.1 provides for a
TR-08 interface to the switch,
SLC
2000, or
SLC
96 COT. If
interfacing with a
SLC
Series 5 COT, it provides an “FPC-
type” interface that uses extended SuperFrame (ESF)
framing format. In addition, FP1.1 provides for an INA
interface. Future economical upgrades will also allow for a
TR-303 interface to a switch.
■
Full Range of Services.
The system offers a full range of
services including POTS (plain old telephone service), locally
switched special services, integrated services digital network
(ISDN), and non-locally switched special services.
■
High Bit Rate Digital Subscriber Line (HDSL) and Other
Interface Capability.
In addition to providing a T1 carrier
interface and a DSX-1 feeder interface, the
SLC LineReach
system can also provide HDSL feeder interface. HDSL
feeders allow the system to operate without repeaters over
existing copper facilities that meet carrier serving area (CSA)
guidelines.
■
Central Office Terminal (COT) Compatibility.
For universal
applications, the
SLC LineReach
system can interface with
the switch through standard
SLC
96,
SLC
Series 5, or
SLC
-
2000 COTs, D4, and DACS.
■
Drop Testing
(non-INA systems only). The system supports
a standard drop testing operations system allowing you to
test and maintain the customer’s drop.
— These features allow you to deploy and maintain the
SLC LineReach
system easily, quickly and flexibly. The system consists of a shelf
assembly with 10 inch by 11 inch dimensions. It is populated with
common circuit packs and channel units.
—The
SLC LineReach
Access System now supports an integrated
configuration with DDM-2000 FiberReach Wideband Shelf which
provides new interface applications.
To Next Page
Loading...
Need help?
General
