Lucent Technologies FiberReach DDM-2000 User Manual

SET-OC3 4of2Page SET-OC3
ainreconfiguredbetotimingallowsmessagingSynchronization
ofonehasparameterThisfailure.fiberornodeauponnetwork
values:followingthe
Kbyte selected,isoptionthisWhenvalue.defaulttheisThis
transmitted,aremessagessyncbyteS1andK2both
syncforinterpretedandreceivedisbyteK2onlybut
messaging.
Sbyte sentisbyteS1theonlyselected,isoptionthisWhen
alwayswillbyteK2messaging.syncforreceivedand
message.Use""Don’tasend
NOTE:
DDM-2000thattimeofamounttheminimizeTo
ringaupgradingwhenmodeholdoverinis
fromnetwork Kbyte to Sbyte isitmessages,
theupgradefirstuserthethatrecommended
timingexternalthefromawayfarthestnodes
thetoclosernodestoproceedthenandsource,
source.timing
disabled K2bothofinterpretationselected,isoptionthisWhen
"Don’tahenceanddisabledbewillbytesS1and
allatbytesbothontransmittedbewillmessageUse"
times.
MainaentersusertheifforpromptednotisparameterThis
value.Address
aisalm andAISlineOC-3NSAtheoflevelalarmprovisionedtheisAlarm
values:followingthehas
cr alarmCritical
mj alarmMajor
mn alarmMinor
na (default).reportedbutalarmed,Not
dcc ininterfaceOC-3MainthetoapplicableonlyisparameterThis
OC-3anconfiguresthatparameteraisDccModelater.andR4.0
application.1+1orringaeitherwithinterworktointerfacering
parameter,thisforvaluesvalidtwoareThere "distinct"
or(default) "identical" forconfiguredWhen. "distinct" a
ischannel)overheadembedded(SONETlinkdataDCCseparate
pair.theinlineOC-3eachtoassigned
allowTointerworking.ringsupportsthatconfigurationtheisThis
theatinterfaceOC-31+1atointerconnecttointerfaceOC-3the
tosetbeshouldDccModethefar-end, "identical" thisIn.
FiberReachDDM-2000 2000June3Issue 11-281

Lucent Technologies FiberReach DDM-2000 Specifications

General

Brand	Lucent Technologies
Model	FiberReach DDM-2000
Category	Multiplexer
Language	English