Lucent Technologies FiberReach DDM-2000 User Manual

SET-STS1 3of2Page SET-STS1
sfail SignalFailure oftermsinchannelSTS-1theofBERthespecifies
ainthresholdthisexceedingorMeeting10.basethetologarithma
condition,failsignalaconsideredisring"Path_Switched"VT
pathVTacausingsubsequentlyandinsertionAISVTainresulting
SignalFailuretheforaddressvalidonlyTheswitching.protection
isparameter all followingtheofonehavecanparameterThis.
values:
-3 "VTaininsertionAISVTinresultingthresholdBER
protectionpathVTthecausingandring"Path_switched
(default).switching
-6 insertionAISVTinresultwillthresholdBERthisprovisioned,If
pathVTacausewillandring",Path_Switched"VTain
switching.protection
nsa later.and2.1ReleaseFiberReachinavailableisparameterThis
non-servicetheoflevelalarmprovisionedtheisparameterThis
values:followingthehasandAISpathSTS-1affecting
mn (default)alarmMinor
nr reported.notandalarmedNot
sa affectingservicetheoflevelalarmprovisionedtheisparameterThis
values:followingthehasandAISpathSTS-1
cr channels)ringfor(defaultalarmCritical
na reportedbutalarmed,Not
theandenteredisparameterthresholdfailsignalordegradesignaltheIf
thanothervalueanyisusedaddress all thewithdeniedbewillcommandthe
message:following
langisehtroedargedlangisehtrofsserddadilavylnoehT*/
.}lla{siretemarapliaf
retneretemarapedargedlangisehttesoT
:1sts-tes
lla =rgd: eulav /*;
11-330 2000June3Issue FiberReachDDM-2000

Lucent Technologies FiberReach DDM-2000 Specifications

General

Brand	Lucent Technologies
Model	FiberReach DDM-2000
Category	Multiplexer
Language	English