Lust CDA3000 - Page 350

Application Manual CDA3000
Appendix D Index
A-34
ASTER = ROT_3
..................... 4-32, 4-35
Control terminal configuration, ASTER = BUS_3
......
4-45
Control terminal designation, CDA3000
.......... 2-4
Control terminal designation, UM-8140
.......... 2-5
Control terminal device
ASTER=ROT_2
.............................. 4-30
Control terminal expansion
ASTER = DRV_5
............................ 4-21
ASTER = ROT_3
............................ 4-33
Control terminals
User module UM-8I4O
............... 4-21, 4-33
Control terminals, Specification
.................. 2-8
Control word of system
......................... 5-80
Controlled speed reduction
..................... 5-68
Controls and displays
............................. 3-9
Current control
................................... 6-56
Current controller
....................... 5-122, 6-34
Current injection
................................. 6-18
Current losses on motor cables
................ 5-132
Current overload protection
.................... 5-124
Current threshold, detection of current application to
motor
........................................ 5-98
Current-controlled startup
..................... 5-124
D
Dangers ............................................ 1-1
Data structure
..................................... 3-2
Data structure of the CDA3000
................... 3-2
DC braking
...................................... 5-117
DC holding
...................................... 5-120
DC holding, activating
.......................... 5-121
DC-link buffering
................................ 5-67
Deceleration ramp
.............................. 5-105
Demagnetization time
.......................... 5-117
Dependency of ramp steepness
............... 5-127
Determination of the shutdown time in the factory
setting
....................................... 5-57
Device capacity utilization
............... 5-74, 5-75
Device data
...................................... 5-77
Device protection
................................ 5-63
Device reset
..................................... 2-19
Differential current monitoring
.................. 5-89
Display 650-CDSAC
............................ 5-113
Disturbance of the analog input
................ 2-17
Drive dimensioning
.............................. 5-74
Drive solution
Field bus operation
......................... 4-40
Master/-Slave operation
.................... 4-49
Driving profile generator
............... 5-40, 5-102
Driving profile generator block diagram
....... 5-103
Driving sets
............................. 5-40, 5-109
DRV_1
............................................. 4-9
DRV_2
........................................... 4-11
DRV_3
........................................... 4-14
DRV_4
........................................... 4-17
DRV_5
........................................... 4-20
Dynamic, maximum
............................ 5-124
E
Effect of active current reference PFC .......... 5-69
Effective inverter capacity utilization
........... 5-76
EMC (Electromagnetic Compatibility)
............. 1-1
Emergency operation with limit switch evaluation
....
4-45
Encoder evaluation
.............................. 6-50
Equivalent circuit diagram of asynchronous machine
5-133
Error
ATT1
........................................... 3-7
Reset
................................. 5-86, B-13
Error history
...................................... 5-88
Error messages
............ 2-14, 5-85, B-13, B-20
Error messages of the CDA3000
............... B-14
Error messages, acceleration processes
...... 5-106
Example
Driving sets
................................ 5-109
Emergency operation, ASTER = BUS_3
... 4-46
Error view on DriveManager
............... 5-88
Expanded manipulating range 87 Hz
characteristic
................. 6-11
Input ISD00
................................. 5-47
Limit switch evaluation
..................... 4-16
Master/-Slave coupling (ASTER = M-S_3) 4-58
Master/-Slave coupling (ASTER = M-S_4) 4-60
of coupling factor MSFCT
................. 5-115
of two directions (ASTER=M-S_2)
......... 4-56
Quick jog driving profile (ASTER=DRV_4)
. 4-19
Quick jog/slow jog (ASTER = DRV_1)
...... 4-10
Reference source switchover
.............. 5-46