215922 179 Revision A
Figure 4.131: Hydraulic Hose Management System
16. Pivot hose management system (B) forward with
handle (A), and engage hook (D) into latch (C) on header.
Figure 4.132: Header Stand
17. Remove the header leg pin (B) by removing the hairpin (A)
from header leg on both sides.
18. Lower header stand (D) by pulling spring loaded pin (C).
Release spring pin to lock stand.
Figure 4.133: Center-Link
19. Windrowers with self-aligning center-link: Release center-
link latch (A) before returning to the cab.
OPERATION
To Next Page
