215922 57 Revision A
Figure 3.29: Beacon Light Button
3.7.5 Turn Signal / Hazard Lighting
Turn signal and hazard lights are used to alert other drivers.
Figure 3.30: Turn Signal/Hazard Button
Switches (A) activate the left and right turn signals. Press the
switches again to turn the selected signal off.
NOTE:
Turn signals can also be controlled with the REEL/DISC SPEED
switches on the ground speed lever (GSL) when the header is
disengaged.
Switch (B) activates the hazard lights. Press the switch again to
turn the lights off.
OPERATOR’S STATION