Magnetek IMPULSE G+ 4 Series User Manual

IMPULSE
®
•G+ & VG+ Series 4 Technical Manual
November 2020
Page 180
5.8 Keypad Parameters
• O01 Monitor Selection
• O02 LO/RE Key Selection
• O03 Maintenance History
• O04 Copy Function
5.8.1 Monitor Selection
The home level of the keypad allows the viewing of four monitor variables. They are Fref, Fout, Iout, and User-
Selected monitor. This user-selected monitor can be selected from the following table. See Table 5-110 on
page 189 for available monitors.
Table 5-106: Monitor Selection Parameter Settings
Parameter Display Function Range Default
O01-01 User Monitor Sel Selects the content of the last monitor that is
shown when scrolling through the Monitor
menu. Enter the last three digits of the
monitor parameter number to be displayed:
U0X-xx.
Default: 106 (Monitor: Output Voltage
Reference U01-06)
104–626 106
104 Control Method
105 Motor Speed
106 Output Voltage
107 DC Bus Voltage
108 Output HP
109 Torque Reference
110 Input Term Sts
111 Output Term Sts
112 Int Ctl Sts 1
114 CPU 1 SW Number
115 Term A1 Level
116 Term A2 Level
117 Term A3 Level
120 SFS Output
121 AI Opt Ch1 Level
122 AI Opt Ch2 Level
123 AI Opt Ch3 Level
125 DI Opt Status
128 CPU 2 SW Number
134 OPE Error Code
139 Transmit Error
144 ASR Out w/o Fil

Magnetek IMPULSE G+ 4 Series Specifications

General

Brand	Magnetek
Model	IMPULSE G+ 4 Series
Category	DC Drives
Language	English