Magnetek IMPULSE G+ 4 Series User Manual

IMPULSE
®
•G+ & VG+ Series 4 Technical Manual
November 2020
Page 44
3.2.6 Interface Board (S4IF)
3.2.6.1 DIP Switches and Jumper Locations
Figure 3-12: S4IF DIP Switches and Jumper Locations for 120 VAC, 42–48 VAC, and 24 VAC
Figure 3-13: S4IF DIP Switches and Jumper Locations for 24 VDC
Table 3-5: Terminal and Wire Specifications
Terminal Symbol Screw Size
Tightening Torque
in.-lbs (N-m)
Wire Range
AWG (mm
2
)
All Terminals M3 4.4 to 5.3
(0.5 to 0.6)
26 to 16
(Stranded: 0.14 to 1.5)
(Solid: 0.14 to 1.5)

Magnetek IMPULSE G+ 4 Series Specifications

General

Brand	Magnetek
Model	IMPULSE G+ 4 Series
Category	DC Drives
Language	English