IMPULSE
®
•G+ & VG+ Series 4 Technical Manual
November 2020
Page 81
5.2 Special Functions
Table 5-14: Special Function Usage
: Available for the Motion selected
×: Not available for the Motion selected
Access Level (A01-01) Advanced (2)
Motion (A01-02) Traverse (0) Standard Hoist (1)
NLB
Hoist (2)
Function/Control Method (A01-03) V/f (0) OLV (2) FLV (3) V/f (0) OLV (2) FLV (3)
C01: Quick Stop™
C01: Reverse Plug Simulation™
× ×
C02: Micro-Speed™
C03: End of Travel Limits
C03: Phantom Stop
C03: Load Sharing/Torque Following
× × × ×
C03: Klixon
C03: Hook Height Measurement
× × × ×
C03: EPLS × × × ×
C04: Load Float × × × ×
C05: Load Check II™
× × ×
C06: Swift-Lift™/Ultra-Lift™ × × ×
C07: Torque Limit × ×
C07: Anti-Shock
× × × × ×
C08: No-Load Brake Hoist × × × × ×
C08: Brake Answerback
C08: Emergency Lift
× × × × ×
C09: Digital Input Option Setup
C10: Weight Measurement × × ×
C11: Slack Cable Detection
× × × × ×
C11: Snap Shaft Detection × × × × ×
C12: Brake Delay Timers × × ×
C12: On/Off Delay Timers
C12: Maintenance Timer
C13: Inch Control
C13: Index Control
× × × ×
To Next Page
Loading...
Need help?
General
