McHale Fusion 2 electronic control system section
11- 34
McHale Fusion 2 round baler wrapper technical service manual
Issue 1: 0208
“Unblock”
This is not really an error message but signifies that unblock is active, a quick push
on the reset unblock switch on the control box will restore everything to a working
condition.
Unblock Reset unblock
Lube Count
An alarm is provided to remind the operator to change the
grease cartridge and top up the lubrication oil after a preset
number of cycles. This counts down from 300 and gives a
reminder at zero. It may be reset sooner if desired, from
within the bale count menu.
To Next Page
Loading...
