McHale Fusion 2 - Dispenser Moving Out of Position; Hydraulic Wheel Brakes Sticking; Control Box Settings Altered

McHale Fusion 2 troubleshooting section
14-11
McHale Fusion 2 round baler wrapper technical service manual
Issue 1: 0208
14.23 Dispenser moving out of position during work
14.24 Hydraulic wheel brakes sticking
14.25 Control box altered
Reason Solution Reference Section
Dispenser ring brake
not set correctly
Re-set Brake 10.4.4
Brake pads worn on
brake
Replace brake pads 10.4.3
10.4.4
Brake damaged Replace damaged parts
and re-calibrate
10.4.4
Reason Solution Reference Section
Setting incorrect Re-calibrate as per
instruction supplied
Operators manual
Reason Solution Reference Section
Settings have been
changed in the
technician section of
the control box and the
machine is not
functioning properly as
a result
Reset the control box to
factory settings.