McHale Fusion 2 specific section
05-5
McHale Fusion 2 round baler wrapper technical service manual
Issue 1: 0208
5.7 Description of safety warnings and instructions
Danger areas which cannot be protected by any devices are marked by yellow
safety decals. Therefore it has to be ensured that all safety warnings and
instructions are understood and followed. If any of the decals are damaged or are
missing they are available from your McHale dealer. The relevant part numbers
are shown in brackets. Note: The most important instructions are shown as
pictographs.
The accurate meanings are explained as follows:
Machine chassis plate.
Read instruction manual before use.
(CST00110)
Turn off and remove key from tractor, read
and understand manual before working on,
or performing maintenance on the machine.
(CST00113)
Close protective covers before
operating the machine.
(CST00114)
Beware of high-pressure hoses, even when
machine is switched off. Also read and
understand manual before working on any part of
the hydraulic system.
(CST00111)
Keep clear of pickup area as long as the
engine is running and the PTO shaft is
connected to the tractor.
(CST00108)
To Next Page
Loading...
