McHale Fusion 2 specific section
05-6
McHale Fusion 2 round baler wrapper technical service manual
Issue 1: 0208
Lock the chamber door before working
on the open bale-forming chamber.
(CST00155)
Beware of rotating dispensers, ring
and moving wrapping table rollers!
(CST00116)
Do not stand on the platform or
elsewhere on the machine when the
machine is moving or working.
(CST00107)
Keep hands out of crush area
between roller & chassis rail.
(CST00120)
Hydraulic accumulator is under high pressure.
Slowly release hydraulic pressure before carrying
out any maintenance.
(CST00115)
Knives of the cutting device should only be
removed with an appropriate tool and protective
gloves.
(CST00112)
Keep hands clear of rotating rollers.
(CST00017)
To Next Page
Loading...
