Micom P634 - Fault Data Acquisition (Function Group FT_DA)

3.19 Fault Data Acquisition (Function Group FT_DA)
When there is a primary system fault, the P634 collects the following measured
fault data:
Fault duration:
(008 010) FT_DA: Fault duration
Running time:
(004 021) FT_DA: Running time
Type of fault:
(004 198) FT_DA: Fault determ. with
Fault data acquisition time:
(004 199) FT_DA: Run time to meas.
Fault currents:
(010 199) FT_DA: Fault curr. P,A prim
(013 175) FT_DA: Fault curr. P,B prim
(013 177) FT_DA: Fault curr. P,C prim
(013 179) FT_DA: Fault curr. P,D prim
(010 216) FT_DA: Fault curr. N,A prim
(013 176) FT_DA: Fault curr. N,B prim
(013 178) FT_DA: Fault curr. N,C prim
(013 180) FT_DA: Fault curr. N,D prim
(025 086) FT_DA: Fault curr.IP,a p.u.
(026 086) FT_DA: Fault curr.IP,b p.u.
(027 086) FT_DA: Fault curr.IP,c p.u.
(028 086) FT_DA: Fault curr.IP,d p.u.
(025 087) FT_DA: Fault curr.IN,a p.u.
(026 087) FT_DA: Fault curr.IN,b p.u.
(027 087) FT_DA: Fault curr.IN,c p.u.
(028 087) FT_DA: Fault curr.IN,d p.u
(025 088) FT_DA: Fault curr.IY,a p.u.
(026 088) FT_DA: Fault curr.IY,b p.u.
(027 088) FT_DA: Fault curr.IY,c p.u.
3 Operation P634
P634/EN M/R-42-A // P634‑311‑653 3-111