9.10 Measurements
Parameter
Scaling Unit Multiplier
Multiplication factor; not supported.
Parameter
Range configuration Scaled Measurement Range: Min
Scaled Measurement Range: Max
Lower / Upper measuring range limit value; not supported.
Parameter Default Value
Deadband
Configuration
Deadband 100
Multiplier for the smallest display value of the measured value. In order to have
the current measured value sent when it has changed from the value last sent
the result of the set dead band value multiplied by the smallest display value
must exceed the smallest display value.
9 IEC 61850 Settings via IED Configurator P634
P634/EN M/R-42-A // P634‑311‑653 9-15
To Next Page
Loading...
