Micom P634 - Fault Recording (Function Group FT_RC); Start of Fault Recording

3.20 Fault Recording (Function Group FT_RC)
3.20.1 Start of Fault Recording
A fault exists and fault recording begins if at least one of the following signals is
present:
●
FT_RC: Trigger
●
FT_RC: Id> triggered
●
FT_RC: IR> triggered
In addition fault recording may also be started manually using setting
parameters or externally through an appropriately configured binary signal input.
P634 3 Operation
3-118 P634/EN M/R-42-A // P634‑311‑653