Micom P634 - Output of External Measured Data

3.10.4 Output of “External” Measured Data
Measured data from external devices, which must be scaled to 0 ... 100%, can be
written to the following parameters of the P634 via the communications
interface.
●
MEASO: Output value 1
●
MEASO: Output value 1
●
MEASO: Output value 1
These “external” measured values are output by the P634 either in BCD data
form or as load-independent direct current, provided that the BCD measured
data output function or the channels of the analog measured data output
function are configured accordingly.
3 Operation P634
P634/EN M/R-42-A // P634‑311‑653 3-59