Micom P634 - Page 424

Parameter Address
Default Min Max Unit Logic Diagram
Inverse-time overcur‐
rent protection
IDMT1: Function group IDMT1
056 051
0: Without
[spacer]
IDMT2: Function group IDMT2
056 061
0: Without
[spacer]
IDMT3: Function group IDMT3
056 071
0: Without
[spacer]
Cancelling function groups IDMTx or including them in the configuration. If a
function group is cancelled, then all associated settings and signals are hidden,
with the exception of this setting.
Parameter Address
Default Min Max Unit Logic Diagram
Thermal overload
protection
THRM1: Function group THRM1
056 054
0: Without
[spacer]
THRM2: Function group THRM2
056 055
0: Without
[spacer]
Cancelling function groups THRMx or including them in the configuration. If the
function group is cancelled from the configuration, then all associated settings
and signals are hidden.
Parameter Address
Default Min Max Unit Logic Diagram
Time-voltage protec‐
tion
V<>: Function group V<>
056 010
0: Without
[spacer]
Cancelling function group V<> or including it in the configuration. If the
function group is cancelled from the configuration, then all associated settings
and signals are hidden, with the exception of this setting.
P634 7 Settings
7-70 P634/EN M/R-42-A // P634‑311‑653