Microsens MS400870M Series User Manual

102
There are eight priority levels that you can choose to classify data packets. Choose one of
the listed options from the pull-down menu for CoS (Class of Service) priority tag values.
The default value is “0”.
The default 802.1p settings are shown in the following table:
Priority Level
normal
low
low
normal
medium
Medium
High
high
802.1p Value
0
1
2
3
4
5
6
7
Configure Queuing Mode:
There are two different queuing modes:

Microsens MS400870M Series Specifications

General

Brand	Microsens
Model	MS400870M Series
Category	Switch
Language	English