The word or characters to encrypt data sent
to RADIUS server. The word or characters
are up to 31 characters.
The RADIUS service port on RADIUS
server.
<port>: The port number is between 1025
and 65535.
For example:
Console(user-radius)#port 1812
The number of trying to reconnect if the
RADISU server is not reachable.
<retry_time>: 0~2
For example:
Console(user-radius)#retry-time 2
IP address of the first RADIUS server.
IP address of the second RADIUS server.
2.6 Config mode
In order to manage the Managed Switch and set up advanced switching functions, enter the
configure command from Console# directory and then type in “?”. Then, the screen shows
as follows:
Configure LACP functions.
Configure the Managed Switch OAM 802.1ag CFM settings.
Configure the Managed Switch to send information when 802.1x client
authenticates via the Switch.
Display a list of available commands in Config mode.
Show commands that have been used.
Configure IGMP filtering settings.
Set up each port‟s MAC learning function.
Set up target port for mirroring.
To Next Page
Loading...
Need help?
General
