4.4.7.3.6 Configure Port Egress Mode
The following screen page appears if you choose Tag VLAN Settings and then select Port
Egress Mode from the pull-down menu of Select Setting.
Choose either “Normal” or “Untag” option from the pull-down menu for Port Egress mode.
The default setting is “Normal” to all ports.
4.4.8 QoS Configuration
Network traffic is always unpredictable and the only basic assurance that can be offered is
the best effort traffic delivery. To overcome this challenge, Quality of Service (QoS) is
applied throughout the network. This ensures that network traffic is prioritized according to
specified criteria and receives preferential treatments.
QoS enables you to assign various grades of network service to different types of traffic,
such as multi-media, video, protocol-specific, time critical, and file-backup traffic. To set up
the priority of packets in the Managed Switch, click the folder QoS Priority Configuration
from the Switch Configuration menu and then four options within this folder will be
displayed.
To Next Page
Loading...
