1. Event Log: Event log can keep a record of system‟s log events such as system warm
start, cold start, link up/down, user login/logout, etc. They will be kept only when your
CPU version is A06 with Boot ROM version A08 or later version. If your CPU or Boot
ROM version is earlier than the one mentioned above, all events will lose when the
system is shut down or rebooted.
2. Update: This allows users to update the latest firmware, save current configuration or
restore previous configuration to the Managed Switch.
3. Load Factory Setting: Load Factory Setting will set the configuration of the Managed
Switch back to the factory default settings. The IP and Gateway addresses will be set to
the factory default as well.
4. Load Factory Setting Except Network Configuration: Selecting this function will also
restore the configuration of the Managed Switch to its original factory default settings.
However, this will not reset the IP and Gateway addresses to the factory default.
5. Backup Configuration: Set up the configuration for backup.
4.6.1 Event Log
Event log keep a record of user login, logout timestamp information. Select Event Log
from the System Utility menu and then the following screen page appears.
To Next Page
Loading...
Need help?
General
