Click OK to start loading factory settings.
4.6.4 Load Factory Settings Except Network Configuration
Load Factory Settings Except Network Configuration will set all the configuration of the
Managed Switch back to the factory default settings. However, IP and Gateway addresses
will not restore to the factory default.
Load Factory Settings Except Network Configuration is very useful when network
administrators need to re-configure the system “REMOTELY” because conventional Factory
Reset will bring network settings back to default and lose all network connections.
Select Load Factory Setting Except Network Configuration from the System Utility
menu, the following screen page shows up.
Click OK to start loading factory settings except network configuration.
4.6.5 Backup Configuration
Select Backup Configuration from the System Utility menu and then the following screen
page appears.
To Next Page
Loading...
Need help?
General
