DHCP Snooping: Enable or disable DHCP Snooping function.
Default DHCP Initiated Time: Specify DHCP initiated time. (4~9999 seconds)
Default DHCP Leased Time: Specify DHCP Leased time. (4~9999 seconds)
Port Isolation: If port isolation is set to “Enabled”, the customer port (port 1~22) can not
communicate to each other.
IPv6 auto discovery/DHCPv6: Enable to filter IPv6 auto discovery and DHCPv6.
UPnP: Enable to filter UPnP packets.
4.4.14.4 Static IP Table Configuration
Select the option Static IP Table Configuration from the SKA Configuration menu and
then the following screen page appears.
To Next Page
Loading...
