Microsens MS400870M Series User Manual

19
mode, enter the
port command.
of each port.
qos
When in Config
mode, enter the
qos command.
Console(config-qos)#
Set up the priority of
packets within the
Managed Switch.
rstp
When in Config
mode, enter the
rstp command.
Console(config-rstp)#
Set up each port and
aggregated ports‟
RSTP status.
ska
When in Config
mode, enter the
ska command.
Console(config-ska)#
Configure Secure
Customer
Connections (SKA)
settings.
multicast
When in Config
mode, enter the
multicast
command.
Console(config-
multicast)#
Configure static
multicast settings.
switch
When in Config
mode, enter the
switch command.
Console(config-
switch)#
Set up acceptable
frame size and
address learning,
etc.
vlan
When in Config
mode, enter the
vlan command.
Console(config-
vlan)#
Set up VLAN mode
and VLAN
configuration.
show
When in Config
mode, enter the
show command or
enter the show
command and
followed by the
command you
would like to
view its current
setting.
Console(config)#
Show a list of
commands or show
the current setting of
each listed
command.
2.3.2 General commands and quick keys
2.3.2.1 Quick keys
Using the key or entering the
command…
To do this…
Enter the “?” commands
Obtain a list of available commands in the current
mode.
Enter the “help” commands
Obtain a list of available commands in the current
mode.
Enter incomplete characters then
enter the question mark (?)
List all commands similar to incomplete characters.
Enter the “exit” command
Return to the former mode or login screen.
Enter the “history” command
List all commands that have been used.

Microsens MS400870M Series Specifications

General

Brand	Microsens
Model	MS400870M Series
Category	Switch
Language	English