Microsens MS400870M Series User Manual

18
command you
would like to
view its current
setting.
Config
Enter
Config
mode
While in Enable
mode, enter the
configure
command.
Console(config)#
In Enable mode,
users can access the
Switch‟s advanced
features, such as
VLAN, Rate limit,
QoS, etc.
aggr
When in Config
mode, enter the
aggr command.
Console(config-
aggr)#
Configure LACP
functions.
cfm
When in Config
mode, enter the
cfm command.
Console(config-cfm)#
Configure the
Managed Switch
OAM 802.1ag CFM
settings.
dot1x
When in Config
mode, enter the
dot1x command.
Console(config-
dot1x)#
Configure the
Managed Switch to
send information
when 802.1x client
authenticates via the
Switch.
exit
When in Config
mode, enter the
exit command.
Console#
Exit from current
mode
help
When in Config
mode, enter the
help command.
Console(config)#
Show available
commands that can
be used in Config
mode.
history
When in Config
mode, enter the
history command.
Console(config)#
List commands that
have been used.
igmpfilter
When in Config
mode, enter the
igmpfilter
command.
Console(config-
igmpfilter)#
Configure IGMP
filtering settings.
igmp
When in Config
mode, enter the
igmp command.
Console(config-
igmp)#
Configure IGMP
settings.
mac
When in Config
mode, enter the
mac command.
Console(config-
mac)#
Set up each port‟s
MAC learning
function.
mirror
When in Config
mode, enter the
mirror command.
Console(config-
mirror)#
Set up target port for
mirroring.
mvr
When in Config
mode, enter the
mvr command.
Console(config-mvr)#
Configure Multicast
VLAN Registration
(MVR) settings.
port
When in Config
Console(config)#
Configure the status

Microsens MS400870M Series Specifications

General

Brand	Microsens
Model	MS400870M Series
Category	Switch
Language	English