Query Response Interval: This determines the maximum amount of time allowed before
sending an IGMP response report. (Default value 100, One Unit=0.1 second)
Fast Leave: The Fast Leave option may be enabled or disabled. This allows an interface to
be ignored without sending group-specific queries. The default setting is “Disabled”.
Router Ports: When ports are connected to the IGMP administrative routers, they should
be set to “Y”. Otherwise, the default “N” will be applied.
4.4.11.2 IGMP VLANID Configuration
Select the option IGMP VLAN Configuration from the IGMP Snooping menu and then the
following screen page with the ability information of IGMP Snooping and Querying in
VLAN(s) appears.
Select the current VLAN(s) and click Edit to view and edit the ability settings.
To Next Page
Loading...
