4.4.15.6 Linktrace Testing
Select the option Linktrace Testing from the CFM Configuration menu and then the
following screen page appears.
Domain: Select a current registered Maintenance Domain.
Association: Select a current registered Maintenance Association.
Source MEP: View-only field that shows the current MEP ID.
Target MAC/MEP ID: Specify the target MAC or MEP ID for linktrace test.
Flag: Select “FDB Only” or “None” from the pull-down menu.
Hop Count: Specify the Hop-count for linktrace test.
Send linktrace: Start linktrace test.
To Next Page
Loading...
