Update: Click “Update” to update the DHCP snooping table.
Cli Port: View-only field that shows where the DHCP client binding port is.
VID: View-only field that shows the VLAN ID of the client port.
CliIP Addr: View-only field that shows client IP address.
CliMAC Addr: View-only field that shows client MAC address.
SrvIP Addr: View-only field that show the server IP address.
TimeLeft: View-only field that shows DHCP client lease time.
4.5.12 CFM Information
Ethernet Connectivity Fault Management (CFM) is an end-to-end and service-to-service
Ethernet layer operations, administration and maintenance (OAM) 802.1ag protocol. It
includes practical connectivity monitoring, fault verification and fault isolation for large
Ethernet metropolitan-area networks (MANs) and WANs.
As its name implies, IEEE 802.1ag focuses on the connectivity fault management which
provides the following four features on each Virtual Local Area Network (VLAN) basis.
Fault Detection/Fault notification
Fault verification
Fault isolation
Fault Detection/Fault notification
To Next Page
Loading...
Need help?
General
