Microsens MS400870M Series User Manual

25
Boot up message
Root directory (Default username: admin without password)
In “Console>”, enter the question mark (?) to show all commands available for User mode.
The screen shows as follows:
Command
Description
cfm
Run OAM 802.1ag CFM loopback, linktrace, delay measurement test.
enable
Enter the Enable mode.
exit
Leave the User mode.
help
Display a list of available commands in User mode.
history
Display the command history.
logout
Logout from the Managed Switch.
ping
Allow users to ping a specified network device.
show
Show a list of commands or show the current setting of each listed command.

Microsens MS400870M Series Specifications

General

Brand	Microsens
Model	MS400870M Series
Category	Switch
Language	English