Current/Total/Max Users: View-only field.
Current: This shows the number of current registered users.
Total: This shows the total number of users who have registered.
Max: This shows the maximum number available for registration. The maximum
number is 10.
Account State: Enable or disable this user account.
User Name: Specify the authorized user login name, up to 20 alphanumeric characters.
Password: Enter the desired user password, up to 20 alphanumeric characters.
Retype Password: Enter the password again for double-checking.
Description: Enter a unique description for the user, up to 35 alphanumeric characters.
This is mainly for reference only.
IP Security: Enable or disable the IP security function.
If enabled, the user can access the Managed Switch only through the management station
which has exact IP address specified in IP address field below.
If disabled, the user can access the Managed Switch through any stations.
IP Address: Specify the IP address for IP Security function.
Console Level: Select the desired privilege for the Console operation from the pull-down
menu. Four operation privileges are available in the Managed Switch:
Administrator: Full access right includes maintaining user account & system
information, loading factory settings, etc.
To Next Page
Loading...
Need help?
General
