1. Switch Configuration: Set up frame size, address learning, etc.
2. Port Configuration: Enable or disable port speed, flow control, etc.
3. Link Aggregation: Set up port trunk and LACP port configuration.
4. Rapid Spanning Tree: Set up RSTP switch settings, aggregated port settings,
physical port settings, etc.
5. 802.1X Configuration: Set up the 802.1X system, port Admin state, port
reauthenticate.
6. MAC Address Management: Set up MAC address, enable or disable MAC security,
etc.
7. VLAN Configuration: Set up VLAN mode and VLAN configuration.
8. QoS Configuration: Set up the priority queuing, rate limit and storm control.
9. Port Mirroring: Set up target port to mirror source port so as to enable traffic
monitoring.
10. IGMP Snooping: Enable or disable IGMP and set up IGMP VLAN ID configuration.
11. Static Multicast Configuration: To create, edit or delete Static Multicast table.
12. MVR Configuration: Enable or disable MVR and create MVR VLAN setting.
13. SKA Configuration: Set up DHCP option 82 agent relay, port setting, filtering and
static IP table configuration.
To Next Page
Loading...
Need help?
General
