Revision:1.0(2023-01-12)
118
DICOM print setting items are described as follows:
Item Description
Device Name After you set a server in DICOM Server Setting, the name will appear
in the drop-down list. Select the name of the configured print server.
Service Name Specifies the service properties.
AE Title
Application entity title. Here, it should be consistent with that of the
print server.
Port The communication port here should be set consistent with the print
server port.
Maximum Retries Maximum number of retries for resending reconnection requests upon
the DICOM service failure.
Interval Time (s) Reserved function.
Timeout (s) The time after which the system will stop trying to establish a
connection to the service.
TLS Secure transmission layer protocol. Select whether to encrypt the
data transferred over the network.
Copies Refer to copies of printed files.
Settings Select the type supported by the printer.
Film Orientation Select the orientation for image printing.
Priority Set the priority of the printing tasks.
Film Size Select film size among the selections listed in the drop-down list.
Display Format
Specify the quantity of images printed on each page,
for example, STANDARD\3,2 indicates 6 images are printed for each
page.
Medium Type Specify the print medium.
Cropping Specify whether you want a trim box to be printed around each image
on the film.
Minimum Density Enter the minimum density of the film.
Maximum Density Enter the maximum density of the film.
Configuration Info Enter configuration information in the field.
Destination
Specify where the file is exposed.
• MAGAZINE: stored in the magazine.
• PROCESSOR: exposed in the processor.
Diagnostic Ultrasound System
Service Manual
3 Installation
To Next Page
Loading...
Need help?
General
