Revision:1.0(2023-01-12)
120
Item Description
Interval Time (s) Reserved function.
Timeout The time after which the system will stop trying to establish a
connection to the service.
TLS Secure transmission layer protocol. Select whether to encrypt the
data transferred over the network.
Policy Name Set the DICOM policy.
Deleting the Element
List
Set the DICOM elements that are not sent during worklist query.
Setting MPPS
MPPS setting items are described as follows:
Item Description
Device Name After you set a server in DICOM Server, the name will appear in the
drop-down list. Select the name of the MPPS server.
Service Name Specifies the service properties.
AE Title Application entity title. Here, it should be set consistent with that of the
MPPS server.
Port
DICOM communication port. The default value is 104. Here, the port
should be set consistent with the MPPS server.
Maximum Retries It starts retrying if it fails to send a DICOM task to the server. The retry
entry times should be this value.
Interval Time (s) Reserved function.
Timeout Value: 5-60s, in increments of 5s, and 15s by default. The connection
is disabled if no message will be sent in 15 seconds after the MPPS
being sent.
TLS Secure transmission layer protocol. Select whether to encrypt the
data transferred over the network.
Set the MPPS service as the default when using the MPPS.
Setting Storage Commitment
Storage commitment setting items are described as follows:
Diagnostic Ultrasound System
Service Manual
3 Installation
To Next Page
Loading...
